Ready for Euro 6?

Diesel tools from Draper Tools

Published:  30 July, 2014

Euro Six regulations came into force at New Year, further limiting the amount of particulate matter and nitrogen oxides allowed in new diesel vehicle emissions. Draper Tools has a kit which identifies the quality of Adblue being sold or used within a vehicle - the quality of which is paramount to the effectiveness of the selective catalytic reduction technology used to reduce NOx emissions. The device measures the mixture of urea to see if it's at the correct ratio of 32.5%.

Related Articles

  • Get tooled up 

    A 13-piece Hi-Torq metric coloured combination spanner set from Draper Tool's Expert range includes colours which represent a different size. The tools are forged from chrome vanadium steel which has been hardened, tempered and coloured chrome plated. The set is supplied on a wall mountable storage rack. A Workshop Deluxe Tool Kit is supplied in a large, portable roller cabinet and includes everything from hacksaws to wrenches, cutting wheels to pliers and lots more.

  • Special Mercedes tool 

    This new wheel nut socket set from Laser Tools includes the most commonly used sizes - 17mm, 19mm and 21mm. The set, available through Tool Connection, also includes the special 17mm WAF socket which is a particularly useful tool when working on Mercedes-Benz models. They are all 87mm deep, made from chrome vanadium and colour coded so you can quickly pick up the tool you need for the job. The tools are supplied in a case which neatly fits into a tool tray.

  • Special tools 

    Bespoke tools are becoming more necessary for working on the latest vehicles and Blue Print have added two more this month and are listed next to the vehicle and parts they are intended for use with. A wheel bearing tool is available which is essential for replacing the front wheel bearings on the Suzuki Jimny 1.3i as the bearing is held in place with a lock nut and needs this special four pin adapter to remove it. A seal fitting tool enables easy installation of new rear axle oil seals on the Navara D40 2.5DT 2005> and 3.0DT 2010>. These are a high failure item because of their location in the half shaft and it is very difficult to replace them without this special tool.

  • Join the dots 

    This little tool is approved by VOSA as a headlamp beam setter. The mini tripod can be placed on the bonnet or any surface on the test area and there are two magnets on the base for attaching it to ferrous surfaces. A laser dot indicates if the beam setter is in or out of calibration - it can be used for all sorts of levelling tasks using the line or dot functions. The unit features in Sealey's summer promotion which runs from 1st June to 30th September.

  • Smoke testing tool 

    The Easy Intake tool available from Pichler Tools is an inflatable block-off bladder with a pressurised vapour pass-through which can be used to test an entire intake or exhaust system. It can be used with any brand of smoke machine or leak detector to block off the system to pressurise it and help you find leaks. It confirms to any shape intake/exhaust and can be used with the SmokePro, available from Pichler.


Search

Sign Up

For the latest news and updates from Aftermarket Magazine.


Poll

Where should the next Automechanika show be held?



Facebook


©DFA Media 1999-2016

Mentés