BTN Turbo replacement video

Video on how to replace a turbo on a PSA engine

BTN turbo replacement video

Published:  15 July, 2014

Replacing the turbo on a PSA 1.6 HDI Engine

Related Articles

  • Pick-up loses power 

    The Mitsubishi L200 pick-up is well known for its ruggedness and load lugging capabilities. The example in question is a 2003 model, which is regularly put to work pulling a mini digger in addition to other ground work duties. The vehicle has covered over 140,000 miles and was still going strong; until a few months back.

  • ACtronics - the detail of remanufacturing 

    That was twelve years ago when I worked in retail and concerned mainly water pumps and alternators. Today's cars are more sophisticated, with many more electronic components, so the level of knowledge in the repair of these items has increased. However, remanufacturing is more than just repairing faults, it is about learning from each product that comes in and remanufacturing it, based on what you have learnt and then using this knowledge with every subsequent piece of work. The item that comes out of the process should work and look like new, with a lifetime equal to, if not beyond, the original manufacturer's intentions.

  • It's all in the timing 

    A job I was recently asked to look at had a bit of an odd symptom; it would run (apparently quite well), as long as the camshaft position sensor was unplugged. The previous history on the vehicle, a 2009 2.5 TDI VW Transporter, was very limited. During my initial inspection, I noticed that the vehicle was suffering from a slightly extended cranking time, which is quite normal for a cam sensor related issue, as the engine ECU cannot easily calculate which TDC is which.

  • Bearing in mind 

    Wheel bearings are a component of the vehicle where friction is detrimental to their activity. The bearing must remain free and smooth in its workings in order to ensure the wheel can rotate without impediment.

  • Staying in control 

    www.blue-print.com/gscan


Search

Sign Up

For the latest news and updates from Aftermarket Magazine.


Poll

Where should the next Automechanika show be held?



Calendar

Click here to submit an event

Facebook


©DFA Media 1999-2016

Mentés