Banner launch new EFB batteries

Published:  05 October, 2017

Banner Batteries is extending its Running Bull EFB product offering with the launch of three new UK aftermarket 12V part numbers. Available with immediate effect and providing comprehensive coverage of Ford vehicles with Stop/Start systems are two type number Running Bull EFBs with 65 and 75Ah rated capacities respectively. Also scheduled to be introduced is an additional Running Bull EFB battery rated at 80Ah that is suitable for a raft of models from Audi, VW and Skoda. In addition to high levels of vibration resistance and twice the cycle life of a conventional battery, EFBs features a double-lid design to safeguard against leaks.
www.bannerbatterien.com

Related Articles

  • NGK-NTK 5-wire sensors  

    NGK continues to enhance its NTK sensors offering with the launch of 20 new wide band Lambda sensors. The new wide band sensors – commonly referred to as ‘5-wire’ Lambda sensors – will supplement the company’s existing range of 64 NTK OE 5-wire sensors.The launch significantly increases its UK range coverage – particularly for VAG models – and means that NGK now has 5-wire sensors available for almost every vehicle manufacturer who utilises this technology.  The products are now visible on MAM Software and are supported by full OE and competitor cross-references NGK also recently announced that it is to introduce a range of new premium NTK camshaft and crankshaft sensors in the UK in 2019. A new European programme, comprising 567-part numbers covering 88% of the car parc, equivalent to 270 million cars, was announced recently at the Automechanika Frankfurt show and UK-specific part numbers and vehicle parc coverage will be confirmed over the coming months.
    www.ngkntk.com

  • Launch UK’s new PRO-Series leak detectors  

    Launch UK has brought two new automotive diagnostic leak detectors to the UK aftermarket that have been specifically engineered for vehicles sold in the EU. As part of the PRO-Series range, SMOKE1 and SMOKE2 are intended for quickly finding leaks in petrol and diesel turbo systems, operating at higher pressure than EVAP models. Both tools support UV detection for small leaks and offer efficient diagnosis when it is needed most, thanks to instant smoke generation and a smart five-minute smoke cycle.
    www.launchtech.co.uk

  • New to the UK: Bosch BAT 645 and BAT 690 battery chargers  

    The new BAT 645 and 690 battery chargers from Bosch feature 45 or 90 amperes of continuous current output.  They are suitable for conventional lead-acid and gel batteries, as well as absorbent glass mat (AGM) and enhanced flooded battery (EFB) technologies and lithium-ion LiFEPP04 (LFP) batteries. When the tool identifies an ‘exhausted’ or empty battery, the battery chargers use a specific setting to maximise battery life. Using back-up mode, the devices ensure a stable power supply even when the starter battery has been removed. Meanwhile, buffer mode supports on-board power supply during control unit updates.

  • New solenoid range additions from SMPE  

    SMPE has added five new VVT oil control solenoid part numbers to its range. The latest additions are available across the company’s house brands including Intermotor, Fuel Parts and Lemark, as well as the Lucas brand for European customers, which from 1 May will be available to the UK aftermarket. SMPE’s range of VVT Oil Control Solenoids have an overall UK car parc coverage of around 3.5 million vehicles, with the new additions covering 947,522 vehicles.The newly extended range will be available in TecDoc with the next update.
    www.smpeurope.com 

  • SMPE plans UK growth 

    Standard Motor Products Europe (SMPE) has announced investment plans for its UK facility.

Most read content


Search

Sign Up

For the latest news and updates from Aftermarket Magazine.


Poll

Where should the next Automechanika show be held?



Facebook


©DFA Media 1999-2019