Pro-Align announces new aftersales commitment

Published:  27 June, 2018

With a growing number of workshops becoming increasingly reliant on their Hunter wheel servicing equipment for profit maximisation, equipment supplier Pro-Align has launched a new, industry leading aftersales response commitment.

Under the new initiative, Hunter-equipped workshops with a valid service agreement can expect to receive an onsite visit from a service engineer within two days of reporting an issue. For customers where a visit cannot be completed within the agreed time frame, no charge will be made for the resulting repair.

“With their massive potential to improve customer service levels and increase revenues, many workshops are now reliant on their Hunter equipment,” explains Nigel Jacob, Aftersales Manager, Pro-Align. “As such an important element of their business success, we wanted to give workshops the peace of mind that in the unlikely event of any equipment downtime, they can be assured of a speedy response from us.”

Nigel adds:  “We’ve invested significant sums recently in growing our team, training our staff and implementing new systems designed to improve operational efficiency and effectiveness. The result is that we’re able to launch a host of new initiatives such as the two day guarantee, giving our customers an even better experience and service.”

For more details about Pro-Align’s new service guarantee and aftersales support, visit  www.pro-align.co.uk/proalignservices

Related Articles

  • Pro-Align launches updated logo 

    Pro-Align has launched a new logo designed to reflect a number of changes and enhancements being made throughout the business.

  • In the heat of the fault  

    At the workshop we cover all kinds of vehicles, old, new, big and small but with all these vehicles we need up to date diagnostic equipment to be able locate faults within the electrical system.
        
    In the workshop this summer was a 2009 Volkswagen Golf that had an intermittent issue which meant the car would go into limp mode, the cruise control was disabled and the climate control wouldn’t work. Understandably in the weather we were having the lack of air conditioning was a major concern to the customer. No one wants to be without air conditioning in 30Cº.
        
    I plugged in the trusty diagnostics reader and came up with four faults. These included turbo boost sensor, manifold pressure, throttle pedal position sensor and ‘fuel system
    too rich’.
        
    In my experience cars can throw up all kinds of trouble codes even when there is no issue with that part. I wouldn’t say some manufacturers are more troublesome than others but if a light does appear on the dash it’s best to get it checked out as soon as possible.

    Issues
    I cleared the fault codes and told the customer to see how it drove and if the issues resolved themselves. The customer had the car for just an hour before they called and said that the problem had reoccurred, as much as this is a pain for the customer I always clear the faults and see if it happens again rather than changing unnecessary sensors. I got the Golf back into the workshop and once again plugged the computer in, which brought up one code. This was the throttle position sensor. A quick call to VW and a discussion with their parts people showed that this particular issue can lead to the cruise and climate control not working.
        
    Next day delivery on the part means the car came back in the following day. One bolt, two plastic clips and an electrical connection later and the pedal was off. Gone are the days of the throttle cable. The throttle response is now done by a sensor on the pedal which works out how far the pedal is being pushed and tells the engine how to respond. It is clever stuff,  when it works.
        
    A pedal replacement on the Golf only takes five minutes and another clear of the fault code before taking the car for a road test. On the test drive cruise and climate control were checked as well as making sure no dash lights had appeared.
        
    Modern mechanics have become very computerised. Dash lights appear whether it is indicating an issue with the airbag systems, ABS or engine and diagnostic computers are so important to narrow down what the issue could be. I dislike the reliance that some workshops put on just trusting what appears on the screen of the diagnostics. It is still imperative that mechanics test sensors and look into live data to make sure that unnecessary components are not replaced and the costs put onto the customer, who will have to pay.


  • Staying ahead in the aftermarket 

    The automotive aftermarket is facing a period of great opportunity and change. With sales of new cars in decline, third-party parts providers are recognising the increasing importance of aftersales service. Faced with increasing competition and evolving customer expectations, garages must adapt their processes and adopt new technologies to succeed.

  • Sigmavision launch new tyre sales management service 

     Sigmavision Ltd is launching TreadManager, a new cloud-based tyre sales management service later this year at Automechanika Frankfurt.

  • Andrew Page to supply new Castrol GTX range  

    Andrew Page and Castrol have entered into a partnership to supply the new Castrol GTX range, which celebrates its 50th anniversary in 2018.

Most read content


Search

Sign Up

For the latest news and updates from Aftermarket Magazine.


Poll

Where should the next Automechanika show be held?



Facebook


©DFA Media 1999-2018