DENSO diesel engine efficiency with i-ART

Published:  08 July, 2018

DENSO is using its i-ART pressure sensors to deliver optimal fuel injection control. The design of the miniature pressure sensors, which monitor injection activity from within the structure of the injector itself, allows a high level of fuel injection accuracy, monitoring the amount and timing of the process with 1/100,000 second precision. The technology ensures modern diesel engines offer a cleaner, quieter and more fuel-efficient drive.i-ART has already become diesel technology of choice to some of the largest manufacturers in the world, including becoming a key selling-point for Volvo’s eco-friendly Drive-E engine.
https://www.denso.com/global/

Related Articles

  • DENSO launches new sensors for Toyota and Lexus  

    DENSO has added 10 camshaft and crankshaft position sensors to its range. The five new crankshaft position sensors have 129 applications across the Toyota and Lexus range incorporating both past and present vehicle models. The eight new camshaft position sensors have 119 applications across the same vehicle pool.

  • TOTAL QUARTZ 9000 FUTURE FGC 5W-30 

    TOTAL QUARTZ 9000 FUTURE FGC 5W-30 is specifically designed for petrol engines using Stop/Start technology, smaller engine sizes, turbocharging and, in some cases, electrification to create a hybrid system. As with the entire TOTAL QUARTZ line-up, 9000 FUTURE uses TOTAL’s Age Resistant Technology (ART). The formula fortifies anti-oxidation properties of the engine oil and therefore offers protection against sludge formation and wear. The 5W-30 oil grade combined with special additives helps to make cold starts easier and the low phosphorus content prevents three-way catalytic converters from damage and reduces NOx, HC emissions and CO2 emissions.
    www.lubricants.total.com

  • TOTAL QUARTZ 9000 FUTURE FGC 5W-30 

    TOTAL QUARTZ 9000 FUTURE FGC 5W-30 is specifically designed for petrol engines using Stop/Start technology, smaller engine sizes, turbocharging and, in some cases, electrification to create a hybrid system. As with the entire TOTAL QUARTZ line-up, 9000 FUTURE uses TOTAL’s Age Resistant Technology (ART). The formula fortifies anti-oxidation properties of the engine oil and therefore offers protection against sludge formation and wear. The 5W-30 oil grade combined with special additives helps to make cold starts easier and the low phosphorus content prevents three-way catalytic converters from damage and reduces NOx, HC emissions and CO2 emissions.
    www.lubricants.total.com

  • Diesel EGR and Turbo Cleaner 

    Lucas Oil is extending its additive solutions range with the introduction of a solvent-based fast action Diesel EGR and Turbo Cleaner spray. When sprayed into the air intake system, Diesel EGR and Turbo Cleaner removes carbon, lacquer, tar and varnish deposits and restores engine performance. To use, remove the flexible hose between the turbo charger/intercooler and the air intake manifold while a warm engine is idling. Then direct short bursts of spray into the air intake manifold. In extreme cases, the EGR valve-housing can be removed and the spray directed straight on to the unit itself. First stocks are expected to be available at UK motor factors from 1 November 2017.

  • Pressure sensors 

    A blocked DPF is often down to failed active or passive regenerations due to driving conditions and can also be down to other component failure such as the EGR system. Pressure sensors detect a filter that is beginning to get clogged up when it is about 45% blocked and the vehicle will then attempt an active regeneration to burn off the soot. It needs to be driven at a constant throttle for several minutes to achieve this, if a vehicle only ever doers short, town commutes then this process is never completed. If it gets to 75% blocked the DPF warning light will come on and the vehicle may go into 'limp home' mode - it may be possible to do a forced regeneration using a diagnostic tool such as Blue Print's G-Scan. If the light is ignored, the filter will completely block and will need to be replaced. Blue Print's range of DPFs include 31 part numbers for 44 applications.

Most read content


Search

Sign Up

For the latest news and updates from Aftermarket Magazine.


Poll

Where should the next Automechanika show be held?



Facebook


©DFA Media 1999-2018