LIQUI MOLY: Diesel Purge

Published:  07 January, 2019

LIQUI MOLY’s Diesel Purge was developed to dissolve deposits and improve engine characteristics. It is effective against deposits in the injectors and in the fuel system. Application is easy: Just pour the can into the tank. It can also be applied in a preventative manner too. Also, when a car comes in for regular inspection and the diesel filter has to be changed, you can simply fill up the new filter with Diesel Purge. Then let the engine runs on pure additive for the first few minutes.


www.liqui-moly.com

Related Articles

  • Rejuvenating makeover for older engines 

    LIQUI MOLY Injection Cleaner frees the engine from deposits and restores its original performance. It is simply poured into the fuel tank. Every time the engine is running, the cleaning ingredients, together with the gasoline, get into the injection system and disintegrate the encrustations. The dissolved dirt is burnt in the engine and emitted together with the exhaust gases. The combustion chamber becomes clean again. In the event of tough dirt it can become necessary to use a can of Injection Cleaner for several refuelling processes in a row. Injection Cleaner can also be used preventively: One can every 2,000 kilometers ensures that new deposits cannot form in the first place.

    www.liqui-moly.com

  • DENSO diesel engine efficiency with i-ART  

    DENSO is using its i-ART pressure sensors to deliver optimal fuel injection control. The design of the miniature pressure sensors, which monitor injection activity from within the structure of the injector itself, allows a high level of fuel injection accuracy, monitoring the amount and timing of the process with 1/100,000 second precision. The technology ensures modern diesel engines offer a cleaner, quieter and more fuel-efficient drive.i-ART has already become diesel technology of choice to some of the largest manufacturers in the world, including becoming a key selling-point for Volvo’s eco-friendly Drive-E engine.
    https://www.denso.com/global/

  • Diesel EGR and Turbo Cleaner 

    Lucas Oil is extending its additive solutions range with the introduction of a solvent-based fast action Diesel EGR and Turbo Cleaner spray. When sprayed into the air intake system, Diesel EGR and Turbo Cleaner removes carbon, lacquer, tar and varnish deposits and restores engine performance. To use, remove the flexible hose between the turbo charger/intercooler and the air intake manifold while a warm engine is idling. Then direct short bursts of spray into the air intake manifold. In extreme cases, the EGR valve-housing can be removed and the spray directed straight on to the unit itself. First stocks are expected to be available at UK motor factors from 1 November 2017.

  • Give diesels a helping hand 

    Soot is a common problem for diesel engines and older vehicles may struggle to pass the emissions test during an MOT because of it so Liqui Moly suggests using its Pro-Line Diesel System Cleaner in this instance. The concentrated treatment has been developed to remove chemical deposits from the fuel system, injection nozzles and combustion chamber. The can is poured into the fuel tank and gets to work after a few miles, dissolving deposits while the fuel is burnt and according to Liqui Moly, this results in the engine regaining its original power, fuel efficiency and exhaust gas values. It also protects against corrosion and minimises the effects of w

  • No more smokey diesels 

    A cleaning additive from Liqui Moly is said to restore an engine's original emission values by regularly adding the product to the fuel tank. Diesel Purge dissolves deposits in the injectors and the fuel system - the main culprit to deteriorating emission values. It is also designed to improve ignition performance of diesel fuel, protect against corrosion and prevent partial-load knocking. When faced with a particularly smokey diesel you can give the engine an instant hit by disconnecting the fuel line and putting the end in the can of Diesel Purge and starting the engine to make it run on pure additive, to achieve the best results. You can also fill up the new diesel filter with the product when a car comes in for a regular inspection so the car runs on additive for the first few minutes. This will remove air out of the new filter and help the vehicle pass the MOT exhaust test too.

Most read content


Search

Sign Up

For the latest news and updates from Aftermarket Magazine.


Poll

Where should the next Automechanika show be held?



Facebook


©DFA Media 1999-2019