Bringing windscreen repair into the 21st century

Published:  04 December, 2018

Screen Care Repairs have developed the world’s first NON UV windscreen repair resin. Safe2Bond resins work in exactly the same way as traditional UV curing resin except they cure using 470nm which is the safe part of the light spectrum. Most windscreen repair kits vary little in their basic design and performance. A bridge is required to hold the injector in position over the pre drilled damage to allow resin to be injected, replacing the air inside the break, and then cured using an ultra violet light. Since the 1970s it has become more apparent in all industries that using UV light sources in the workplace is undesirable and alternatives have been sought in most applications. The Control of Artificial Optical Radiation at Work Regulations 2010 brought into UK law the Artificial Optical Radiation 2006/25/EC Directive. This imposes legal duties on employers to protect workers who may be at risk from artificial UV light exposure. Even low level UV light sources such as windscreen repair lights should be avoided if possible. The Safe2Bond NON UV resins have been developed in house by Screen Care Repairs based on the success of the company’s NON UV glass bonding adhesives. This eliminates the need for UV windscreen repair light sources.
www.screencare.co.uk

Related Articles

  • Most expensive counties for car repairs revealed 

  • WIN with WhoCanFixMyCar.com 

    Aftermarket readers have the opportunity to win a year’s free membership with WhoCanFixMyCar.com. That’s unlimited quoting on the site for a full 12 months, as well as 30 days free support from a dedicated account manager to help you get the best out of your membership.

  • Stay lubricated: Reminder on regular fluid and filter changes  

    Launch UK is reminding technicians of the importance of carrying out regular fluid and filter changes at 75,000 miles, or 50,000 miles for vehicles used in arduous conditions.

  • Launch UK’s new PRO-Series leak detectors  

    Launch UK has brought two new automotive diagnostic leak detectors to the UK aftermarket that have been specifically engineered for vehicles sold in the EU. As part of the PRO-Series range, SMOKE1 and SMOKE2 are intended for quickly finding leaks in petrol and diesel turbo systems, operating at higher pressure than EVAP models. Both tools support UV detection for small leaks and offer efficient diagnosis when it is needed most, thanks to instant smoke generation and a smart five-minute smoke cycle.
    www.launchtech.co.uk

  • Camshaft and crankshaft sensors  

    Walker Products has launched an expanded Camshaft Position and Crankshaft Pulse sensor program to their UK and European range. Finalised at the end of last year, Walker has increased the program’s SKU count by nearly 300, a substantial, triple digit percentage increase from 2018. This allows distributors and technicians to service 240% more applications on the road today. Walker ensures OE fit, form, and function through rigorous R&D testing procedures. This expansion is already in TecDoc through the most recent update.
    www.walkerproducts.com


Search

Sign Up

For the latest news and updates from Aftermarket Magazine.


Poll

Where should the next Automechanika show be held?



Facebook


©DFA Media 1999-2019